All Types of Industrial Feeders
For Every Process, Every Industry
Kian Industry, with over a decade of experience in designing and manufacturing various types of Belt Feeders, Screw Feeders, Vibratory Feeders, Rotary Feeders, Chain Feeders, and Apron Feeders, provides material feeding solutions for mining, cement, steel, and petrochemical industries.
Complete Range of Industrial Feeders
From Belt Feeders for bulk materials to Rotary Feeders for precise flow control — each model is customized based on process requirements, budget, and destination country standards.
Belt Feeder
Belt FeederSuitable for conveying heavy, lumpy, and coarse-grained materials with high capacity. The most common type of feeder in mining and crushing industries.
Screw Feeder
Screw FeederIdeal for powder materials, plastics, chemicals, and granular feeds. Precise flow control with a closed housing.
Vibratory Feeder
Vibratory FeederFor sticky, fine-grained, and wear-sensitive materials. Smooth and uniform operation with minimal material damage.
Rotary Feeder
Rotary FeederPrecise feed rate control in pneumatic and air conveying systems. Resistant to high pressure and temperature.
Chain Feeder
Chain FeederFor heavy, sharp, abrasive, and high-temperature materials. Robust design for harsh working environments such as coking and steel industries.
Apron Feeder
Apron FeederSuitable for large rocks, boulders, and high-impact materials. The most durable feeder type for harsh mining conditions.
Feeder Types
Production Capacity
Based on Needs
Countries
Belt Feeder
BELT FEEDER — KS-BF SERIESThe Belt Feeder is the most common and widely used type of industrial feeder. In this system, a rubber or PVC belt moves over parallel rollers, conveying materials at a constant and controlled rate from under the silo or hopper to the destination. The main advantage of the Belt Feeder is its high capacity, ability to handle coarse materials, and long service life.
- Capacity up to 500 tons/hour — suitable for large-scale crushing lines
- Belt width from 300 to 3000 mm — fully customizable
- Speed control with Variable Speed Drive (VSD) for precise flow rate
- Heat-resistant belt (HR Grade) up to 120°C
- Compatible with wet, sticky, and pasty materials with automatic scraper
- Modular design — quick installation, repair, and component replacement
- Return idler system with optimal spacing to reduce sagging
| Parameter | Feature | Range |
|---|---|---|
| Capacity | Capacity | 5 — 500 t/h |
| Belt Width | Belt Width | 300 — 3000 mm |
| Belt Speed | Belt Speed | 0.05 — 2 m/s |
| Lump Size | Lump Size | Up to 300 mm |
| Working Temp | Working Temp | -20 to +120°C |
| Inclination | Inclination | 0 — 15° |
| Motor Power | Motor Power | 0.75 — 110 kW |
Common Belt Feeder Applications:
Screw Feeder
SCREW FEEDER — KS-SF SERIESThe Screw Feeder uses one or more rotating screws to precisely and controllably convey materials from one point to another. The completely enclosed housing makes this feeder the best choice for toxic, contaminating, fine powder, and moisture-sensitive materials. It is widely used in chemical, pharmaceutical, plastic, and food industries.
⚙️ Working Principle
The rotation of the screw inside the cylindrical housing causes a specific volume of material to be moved with each revolution. By adjusting the motor RPM, the feed rate is precisely controlled — without spillage and without dust.
- Completely enclosed housing — prevents dust and toxic material dispersion
- Ability to change feed rate during operation by adjusting motor speed
- Two screw types: Single Screw and Twin Screw
- Screw material options: St37, Stainless Steel, Hardfaced for abrasive materials
- Installable in horizontal, inclined, and vertical positions
- Sanitary design for food and pharmaceutical industries
- Integrable with automatic weighing and dosing systems
- General materials
- Up to 50 t/h
- St37 Screw
- IP54
- Abrasive materials
- Up to 80 t/h
- Hardfaced Screw
- IP65
- Temperature up to 450°C
- Up to 40 t/h
- Stainless 316
- Water Jacket
| Parameter | Feature | Range |
|---|---|---|
| Capacity | Capacity | 0.1 — 80 t/h |
| Screw Diameter | Screw Diameter | 100 — 600 mm |
| Length | Length | 0.5 — 15 m |
| Working Temp | Working Temp | Up to 450°C (HT) |
| Particle Size | Particle Size | Powder — 80 mm |
| Motor Power | Motor Power | 0.37 — 55 kW |
Vibratory Feeder
Precise and uniform material feeding using controlled electromagnetic vibration — suitable for fine, powder, and dose-sensitive materials.
Precise Flow Control
Real-time flow rate adjustment via frequency controller, without production line stoppage.
No Wear Moving Parts
Pure electromagnetic mechanism — minimal maintenance, long service life.
Suitable for Enclosed Environments
Available with dust-proof covers, suitable for pharmaceutical, food, and chemical industries.
Capacity 0.5 to 150 t/h
Wide capacity range to suit small lines to heavy industrial applications.
Rotary Feeder
Volumetric feeding with complete sealing for pressurized or vacuum systems — ideal for powder, granular, and dusty materials.
Differential Pressure Sealing
Maintains pressure difference up to 1 bar between inlet and outlet without leakage.
Constant Volumetric Feed
Each rotor revolution delivers a constant and measurable volume.
Adjustable Speed
Motor speed control via inverter for precise feed rate adjustment.
Pneumatic System Integration
Direct input to air conveying lines for cement, resin, and light materials.
Chain Feeder
Conveying and feeding heavy, coarse, and abrasive materials in challenging mining and industrial conditions — with high structural strength.
Heavy Steel Chain
Forged steel links with high tensile strength and long service life.
Abrasion Resistance
Hardfacing on contact surfaces — suitable for stone, coke, and minerals.
Integrated with Crusher
Direct input from crusher or vibrating screens without intermediate equipment.
High Conveying Capacity
Continuous feeding of coarse materials up to 400 tons/hour.
Apron Feeder
Withstands severe impact loads from direct loading by excavators — designed for the harshest mining conditions.
Heavy Steel Pans
Overlapping steel plates up to 16mm thickness to withstand direct impact.
Point Load Resistance
Rigid body structure with longitudinal support beams for uniform load distribution.
Direct Excavator Loading
Installable under receiving hopper for direct load without intermediate structure.
Incline Operation
Designed for installation on inclined surfaces up to 20° without material spillage.
